Precision
Test Systems manufacturers' various divider boards as options to its range and
frequency standards and distribution amplifiers.
A new
option will soon be available as a stand alone module called the
MDS10-50.
The
MDS10-50 is a synchronization and divider or multi-divider module.
It takes
a 10 MHz frequency (other input frequencies available upon request) such as
available from a frequency standard and divides the 10 MHz to the following
frequencies.
10 MHz, 5
MHz, 1 MHz, 100 kHz, 10 kHz, 1 kHz, 100 Hz, 10 Hz, 1 Hz, 1 PPM (pulse per
minutes), 1 ppH (pulse per hour). There are four complementary outputs at each
frequency making 88 outputs in all.
All
outputs are TTL compatible and can also drive twisted pair or parallel
transmission lines.
Further
more, all outputs can be synchronized to an external 1 pps (pulse per second)
input such as available from a GPS receiver. The synchronization can either be
on the rising edge or the falling edge of the 1 pps signal.
Every
output will be synchronized to the 1 pps input to within 250 ns or
better.
This
board can be fitted into the following products:
|