Products > TCXOs

GSM Products


              

GSM Controller - Arrow 100
 

GSM Controller - Arrow 100
 
 

Arrow 100 Professional GSM Controller

The Arrow GSM controller should not be confused with low quality GSM alarm modules.

This is a professional UK built GSM Telemetry controller having features not found on any other controller.

Features

  • RS232 communication interface.

  • Windows software supplied for free.

  • Built in GSM engine and external antenna.

  • Unit is fully configured using any computer and the RS232 interface together with the Windows software.

  • 8 digit inputs.  Fully configurable for detection on rising edge, falling edge or both

  • 4 Analogue inputs.  Either 0 to 20 mA or 0 to 5V.

  • 4 x Relay outputs switching 230 VAC @ 10 Amps.  More relays can be added as an option.

  • 2 x sold state outputs

  • RS232 modem feature.  Control your own external RS232 equipment by making a data call.

  • Up to 32 mobile or cell phone numbers can be stored in the Arrow 100's memory.

  • SMS or Text messages can be configured with users own text, e.g.  "Fire Alarm in room 2 activated"

  • 11 to 15 VDC power supply input with optional battery backup or 90 - 260 VAC power supply.

  • Call saving feature. 

  • Programmable real time clock

  • CE marked

  • High quality manufacture.

  • Internal firmware can be customized to suit individual customers.

Detailed Information

The Arrow 100 is the most flexible GSM controller on the market.  Its features, not found on any other controller, enable the Arrow 100 to work in every application.

Fully Configurable

The Arrow 100 can be connected to any PC with a RS232 or USB interface (USB with adapter).  Using the supplied Windows software, every parameter of the Arrow 100 can be set.  Every Arrow 100 can have its own site name and individual password.  So only authorized users will be able to access each Arrow 100. 

Up to 32 cell or mobile phone numbers can be stored.  Up to 10 different cell/mobile phones can be sent a SMS/Text, allowing only the correct personnel to be informed of varying input or alarm conditions.

8 x Digit Inputs

  • Eight digital inputs.

  • All configured via RS232 interface. 

  • Each input can be configured to re-act differently to a rising edge or a falling edge. 

  • Wide range logic levels.  Logic level zero is 0 to 1V and logic level one is 5 to 30 VDC

4 x Analog Inputs

  • Four separate analog inputs

  • Can be configured to react to a 0 - 5 VDC input or 0 to 20 mA.

  • Analog resolution is 1023 bits.

  • These inputs are ideal to connect to water level meters, wind speed indicators, battery monitoring.

  • Input range can be figured.  E.g. for a 0 to 5V input range, 0% can be figured as a 1.5 VDC level and 100% as a 4.5 V level.  Ideal to interface to existing equipment without complicated interface circuitry.

  • Industry standard 0 to 20 mA input with 1023 bit resolution.

The analog inputs allow the Arrow 100 to be used in a variety of applications using external sensors.  Some users could be:

  • Water level measurement.  Measure dam levels.

  • Wind Speed measurement.

  • Voltage monitoring, e.g. battery level, AC mains voltage

  • Motor speed measurement.

4 x Relay Outputs

Each relay can switch 0 to 250 VAC @ 10 A.  Each relay can either be turned on or off by sending a SMS/Text.  Or the relay can be turned on for a programmable length of time ( a few seconds to days). 

Also the relay can be automatically activated on an alarm condition.  As an example, the relay could activate a siren for 60 seconds if Input A has a rising edge transaction and then for 30 seconds if Input A has a falling edge transition. 

More relays can be optionally added using separate modules.  Virtually an unlimited number of relays can be added.

Solid State Outputs

Two state state outputs can source up to 1 A.  These outputs are useful where a relay may be too slow.

RS232 Interface

The on board RS232 interface allows the Arrow 100 to be configured using supplied Windows software.  This saves the expense of sending multiple SMS/text messages.  The baud rate is 9600.

RS232 Modem

This unique feature allows the customer to connect his own RS232 equipment to the Arrow 100.  The external RS232 equipment can then be controlled making a data call.  The Arrow 100 therefore becomes a transparent GSM modem.

Customized Units

We are able to add any features or customize firmware to suit an individual customers specifications. 

 

Brochures
 
 
Arrow 100 Brochure   Available soon.